05 Okt Machining of thermoplastics (EN)
- Download 38
- Dateigrösse 970 kB
- Datei-Anzahl 1
- Erstellungsdatum 5. Oktober 2021
- Zuletzt aktualisiert 7. Oktober 2021
Machining of thermoplastics (EN)
Thermoplastics and especially acrylic glass represent a particular challenge when machining due to their low melting temperatures. They require a special tool design with regard to the grade of carbide, cutting geometry and chip deflector.
JSO tools always achieve so-called CLEARCUT quality.
For polish cutting, grooving, sizing and severing thermoplastics (e.g. acrylic glass). First, clean the surface of the
machined edges by pre-cutting against feed and then finish-cutting (with low chip removal) with feed.
Single and multi-tooth solid carbide router cutters made of standard (HW 04) or micro-grain carbide (HW 08)
with special cutting edge geometry for the best surface quality.
Micro-grain carbide (HW 08) for near polished surface finishes.
All cutters with polished flutes and also with polished clearance. Right-hand rotation – up-cut.